HOME    |    WORKS    |    PRODUCT CATALOGUES    |    CONTACT US
  our range

CONCRETE BLOCKS

 

Dense concrete blocks

 

Hollow and cellular

 

Fibotherm insulating blocks

 

Stowlite lightweight blocks

 

Midi blocks

 

MACRO blocks

 

Generation 2 MACRO blocks

 

T-joist first floor profile blocks

 

Soap bar blocks, coursing and slip bricks

 

Design your own block

 

Padstones

 

T-Joist first floor recessed profile blocks

 

Foundation (trench) blocks

PAVING SLABS

 

Commercial slabs

 

Patio paving and wet cast edgings

 

Tactile and patterned paving

 

Vintage/traditional and decorative

 

Permeable paving

KERBS, EDGINGS & CHANNELS

FLOORING

 

T-joist flooring

 

Hollowcore flooring

 

Flooring blocks

 

Accessories

 

On-site instructions for pre-cast joists

 

On-site instructions for pre-cast hollowcore flooring planks

FLOORING SOLUTIONS

 

For separating floors to help satisfy Robust details part E

 

E-FC-1, 4 and 5

 

E-FC-8, 9 and 11

 

E-FC-1(RSC) and 9(RSC)

 

E-FC-6 and 7

For domestic floors

 

D1, D2 and D5

 

D3 and D4

 

For ground floors to help satisfy Part L

 

L1, L2, L3 and L4

PRE-CAST CONCRETE LINTELS

EDGING, COPING, BOLLARDS AND PILLAR CAPS

 

Edging, bollards & pillar caps

 

Wall coping

FENCING

 

Fencing products

 

Semi-dry economy fencing

 

Portable post bases

 

Concrete barriers

 MACRO blocks

Two Void MACRO Block

TWO-VOID MACRO BLOCK

1035mm  
  875mm
    440mm
 

FOUR-VOID MACRO BLOCK

 
 
Stowell Concrete originally developed two designs* of large-unit interlocking hollow blocks, known as MACRO blocks. These are manufactured for use in the construction of agricultural or industrial retaining walls. Additionally MACRO blocks have been utilised in the construction of aggregate storage bays, retaining walls, temporary barricades and low walls into which temporary fencing can be inserted.

MACRO blocks can be built up with or without mortar between the layers. The voids can then be left empty or filled with aggregates, soil or reinforced concrete, depending on the application and whether the structure is temporary or permanent.

MACRO blocks can be installed using a lorry-mounted crane fitted with a block grab, or a fork truck or a crane equipped with a grab suitable for moving blocks around sites.
MACRO blocks are manufactured using 7.3 N/mm2, 1950kg/m3 concrete mix.

Two-void MACRO blocks weigh approximately 550kg each, while four-void MACRO blocks weigh approximately 625kg each.

MACRO blocks have vertical scoring which breaks up the expanse of concrete and helps disguise the joints between the units when built.

Four-void MACRO blocks are designed to aid splitting along their length using a 300mm diameter diamond blade disc cutter and a bolster chisel.
* additional designs could be created depending on the degree of demand.
All products are available ex works.
Prices on application.
Telephone our sales office for further information and quotations.
DOWNLOAD PDF DATA SHEET
FOR THIS PRODUCT
 
home  |  works  |  product catalogues  |  contact us

Stowell Concrete Limited, Arnolds Way, Yatton Bristol BS49 4QN
Tel: 01934 834000   Fax: 01934 835474   Email: sales@stowellconcrete.co.uk

site design: carn gerrish creative