HOME | WORKS | PRODUCT CATALOGUES | CONTACT US

our range


	CONCRETE BLOCKS
		Dense concrete blocks
		Hollow and cellular
		Fibotherm insulating blocks
		Stowlite lightweight blocks
		Midi blocks
		MACRO blocks
		Generation 2 MACRO blocks
		T-joist first floor profile blocks
		Soap bar blocks, coursing and slip bricks
		Design your own block
		Padstones
		T-Joist first floor recessed profile blocks
		Foundation (trench) blocks

	PAVING SLABS
		Commercial slabs
		Patio paving and wet cast edgings
		Tactile and patterned paving
		Vintage/traditional and decorative
		Permeable paving

	KERBS, EDGINGS & CHANNELS
	KERBS, EDGINGS & CHANNELS

	FLOORING
		T-joist flooring
		Hollowcore flooring
		Flooring blocks
		Accessories
		On-site instructions for pre-cast joists
		On-site instructions for pre-cast hollowcore flooring planks

	FLOORING SOLUTIONS
	For separating floors to help satisfy Robust details part E
		E-FC-1, 4 and 5
		E-FC-8, 9 and 11
		E-FC-1(RSC) and 9(RSC)
		E-FC-6 and 7
	For domestic floors
		D1, D2 and D5
		D3 and D4
	For ground floors to help satisfy Part L
		L1, L2, L3 and L4

	PRE-CAST CONCRETE LINTELS
	PRE-CAST CONCRETE LINTELS

	EDGING, COPING, BOLLARDS AND PILLAR CAPS
	EDGING, COPING, BOLLARDS AND PILLAR CAPS
		Edging, bollards & pillar caps
		Wall coping

	FENCING
		Fencing products
		Semi-dry economy fencing
		Portable post bases
		Concrete barriers

Kerbs, edgings and channels to BSEN 1340

Please refer to the table below, or download the data sheet for full details of our range, weights and packs...

76mm

12½° to 15°

76mm

100mm

h

w
BN (fig.2/2A)
bull nose

w
SP (fig.5/5A)
full batter

w
HB2/HB3 (fig.7/7A)
half batter

25mm

h

w
CD dished
channel

w
CS (fig.8)
square channel

w
EF (fig.11)
square

w
EBN
(fig.13)
bull nose

FITMENTS FOR KERBS

Standard quadrants to match HB2 (fig.7), SP (fig.5) or BN (fig.2)

Internal and external angles to match HB2(fig.7), SP (fig.5) or BN (fig.2)

l

w

h

w

TAPERS AND CROSSING KERBS

914mm

150mm

	To match SP (fig.5), HB2 (fig.7) or BN (fig.2) L/H drop kerb	125mm		914mm
		BN (fig.2a) crossing kerb		To match SP (fig.5), HB2 (fig.7) or BN (fig.2) R/H drop kerb

RADIUS KERBS

		r=radius
	r
road
r		External radius kerb
		External radius kerb
Internal radius kerb

RADIUS (r)
metres 1.0 2.0 3.0 4.5 6.0 7.5 9.0 10.5 12.0	feet 3 6 10 15 20 25 30 35 40	no. per circle 10 16 20 32 44 52 64 72 84

REF	Fig	W x H x L		no. per t	no. per pk

EF EBN EF EBN EF EBN BN2 BN3 SP2 SP3 HB2 HB3 CS1 CS2 CD CD CD DL1/DR1 DL2/DR2 QHB/SP/BN QHB/SP/BN IA HB/SP/BN XA HB/SP/BN	11 13 11 13 11 13 2 2A 5 5A 7 7A 8 8 8 16 16 14 14	50 x 150 x 914 50 x 150 x 914 50 x 200 x 914 50 x 200 x 914 50 x 255 x 914 50 x 255 x 914 125 x 255 x 914 125 x 150 x 914 125 x 255 x 914 125 x 150 x 914 125 x 255 x 914 125 x 150 x 914 255 x 125 x 914 150 x 125 x 914 150 x 100 x 914 255 x 125 x 914 150 x 125 x 914 150 x 100 x 914 HB2-BN (fig.7-2A) SP-BN (fig.5-2A) BN-BN (fig.2-2A) TL (fig.7 to 5 and fig. 7 to 2) TR (fig.5 to 7 and fig. 2 to 7) 305 x 255 455 x 255 125 x 255 x 305 125 x 255 x 305 255 x 75 x 914	Square Top Single Bull Nose Square Top Single Bull Nose Square Top Single Bull Nose Bull Nose Kerb Bull Nose Kerb Full Batter Kerb Full Batter Kerb Half Batter Kerb Half Batter Kerb Square Channel Square Channel Square Channel Dished Channel Dished Channel Dished Channel Drop Kerbs Drop Kerbs Drop Kerbs Transitional Kerbs Transitional Kerbs Quadrants Quadrants Internal Angles External Angles Fluted Channel	61 61 48 48 36 36 14 24 15 24 15 24 14 24 30 15 24 30 20 20 20 15 15 24 12 24 24 24	40 40 20 20 20 20 16 24 16 24 16 24 16 24 30 16 24 30 16 16 16 16 16 15 8 32 32 14

Stowell produce kerbs, channels and fitments to suit every requirement of the roadbuilder. Our hydraulically-pressed pre-cast concrete units are strong and durable and manufactured to strict tolerances. Standard kerbs have a pimpled finish and come in a standard shade of concrete grey.

There are three basic profiles available –
• Bull-nosed (Fig 2 and 2a)
• Half-battered (Fig 7 and 7a)
• Full-battered (Fig 5 and 5a)

Our straight kerbs are 914mm in length while the radius kerbs, designed to form curves of less than 12m radius, are shorter.

The most commonly used road kerbs are the half-battered profiles which provide a check element sufficient to warn motorists that they are close to the edge of the carriageway. They are normally used where a footpath is provided adjacent to the carriageway. Full-battered profile kerbs are used where a vehicle may need to ride up onto a verge in an emergency, for safety reasons these are not used when a footpath is present. Where a crossing is required for access to a private driveway, access point or pedestrian crossing, the appropriate droppers and crossing kerbs are used.

While every effort is made to ensure that the colours of our products do not vary, complete colour consistency cannot always be guaranteed.

Stowell kerbs and paving used in a retail development

All products are available ex works.
Prices on application.
Telephone our sales office for further information and quotations.

DOWNLOAD PDF DATA SHEET
FOR THIS PRODUCT


Download the free adobe PDF viewer by clicking on the icon.

RADIUS KERBS			External radius - feet (metres)									Internal radius - feet (metres)

Ref	Fig		3 (1)	6 (2)	10 (3)	15 (4.5)	20 (6)	25 (7.5)	30 (9)	35 (10.5)	40 (12)	3 (1)	6 (2)	10 (3)	15 (4.5)	20 (6)	25 (7.5)	30 (9)	35 (10.5)	40 (12)
BN2	2	125 x 255
BN3	2A	125 x 150
SP2	5	125 x 255
HB2	7	125 x 255
CS1	8	255 x 125
CS2	8	150 x 125
DL1/DR1	16	HB2-BN (Fig.7-2A)

CONCRETE BLOCKS

PAVING SLABS

FLOORING

FLOORING SOLUTIONS

For separating floors to help satisfy Robust details part E

For domestic floors

For ground floors to help satisfy Part L

EDGING, COPING, BOLLARDS AND PILLAR CAPS

FENCING

Kerbs, edgings and channels to BSEN 1340

Please refer to the table below, or download the data sheet for full details of our range, weights and packs...

76mm

12½° to 15°

76mm

100mm

h

h

h

w BN (fig.2/2A) bull nose

w SP (fig.5/5A) full batter

w HB2/HB3 (fig.7/7A) half batter

25mm

25mm

25mm

h

h

h

h

w CD dished channel

w CS (fig.8) square channel

w EF (fig.11) square

w EBN (fig.13) bull nose

FITMENTS FOR KERBS

Standard quadrants to match HB2 (fig.7), SP (fig.5) or BN (fig.2)

Internal and external angles to match HB2(fig.7), SP (fig.5) or BN (fig.2)

l

w

h

h

w

w

TAPERS AND CROSSING KERBS

914mm

914mm

150mm

To match SP (fig.5), HB2 (fig.7) or BN (fig.2) L/H drop kerb

125mm

914mm

BN (fig.2a) crossing kerb

To match SP (fig.5), HB2 (fig.7) or BN (fig.2) R/H drop kerb

RADIUS KERBS

r=radius

r

road

r

External radius kerb

Internal radius kerb

While every effort is made to ensure that the colours of our products do not vary, complete colour consistency cannot always be guaranteed.

Stowell kerbs and paving used in a retail development

All products are available ex works. Prices on application. Telephone our sales office for further information and quotations.

from stock

subject to availability

home | works | product catalogues | contact us

Stowell Concrete Limited, Arnolds Way, Yatton Bristol BS49 4QN Tel: 01934 834000 Fax: 01934 835474 Email: sales@stowellconcrete.co.uk

copyright=new Date(); update=copyright.getFullYear(); document.write("&copy; 2009 - "+ update + " Stowell Concrete Limited. Company No. 1059577&nbsp;(England)"); // End -->

site design: carn gerrish creative

w
BN (fig.2/2A)
bull nose

w
SP (fig.5/5A)
full batter

w
HB2/HB3 (fig.7/7A)
half batter

w
CD dished
channel

w
CS (fig.8)
square channel

w
EF (fig.11)
square

w
EBN
(fig.13)
bull nose

To match SP
(fig.5), HB2 (fig.7)
or BN (fig.2)
L/H drop kerb

All products are available ex works.
Prices on application.
Telephone our sales office for further information and quotations.

Stowell Concrete Limited, Arnolds Way, Yatton Bristol BS49 4QN
Tel: 01934 834000 Fax: 01934 835474 Email: sales@stowellconcrete.co.uk