HOME    |    WORKS    |    PRODUCT CATALOGUES    |    CONTACT US
  our range

CONCRETE BLOCKS

 

Dense concrete blocks

 

Hollow and cellular

 

Fibotherm insulating blocks

 

Stowlite lightweight blocks

 

Midi blocks

 

MACRO blocks

 

Generation 2 MACRO blocks

 

T-joist first floor profile blocks

 

Soap bar blocks, coursing and slip bricks

 

Design your own block

 

Padstones

 

T-Joist first floor recessed profile blocks

 

Foundation (trench) blocks

PAVING SLABS

 

Commercial slabs

 

Patio paving and wet cast edgings

 

Tactile and patterned paving

 

Vintage/traditional and decorative

 

Permeable paving

KERBS, EDGINGS & CHANNELS

FLOORING

 

T-joist flooring

 

Hollowcore flooring

 

Flooring blocks

 

Accessories

 

On-site instructions for pre-cast joists

 

On-site instructions for pre-cast hollowcore flooring planks

FLOORING SOLUTIONS

 

For separating floors to help satisfy Robust details part E

 

E-FC-1, 4 and 5

 

E-FC-8, 9 and 11

 

E-FC-1(RSC) and 9(RSC)

 

E-FC-6 and 7

For domestic floors

 

D1, D2 and D5

 

D3 and D4

 

For ground floors to help satisfy Part L

 

L1, L2, L3 and L4

PRE-CAST CONCRETE LINTELS

EDGING, COPING, BOLLARDS AND PILLAR CAPS

 

Edging, bollards & pillar caps

 

Wall coping

FENCING

 

Fencing products

 

Semi-dry economy fencing

 

Portable post bases

 

Concrete barriers

 Design your own block

915mm max.
  1160mm max.
      Height 450mm max.
38mm min.  
   
  Height
200mm
min.
 
Please phone Stowell on 01934 834000 or fax on 01934 835474 with your block design ideas. Alternatively smaller volume orders could possibly be cut from our existing range of product to suit your requirements.
The blocks can be designed with the following concrete mixes...
 
material oven dry density kg/m3 strength N/mm2
Dense concrete 1950 7.3 to 17
Medium dense (Stowlite) 1450 7.3
Insulation (Fibo) 850 3.6
Dense closetex 1950 7.3 to 10.4
Medium dense closetex
(Stowlite closetex)
1450 7.3
 
Stowell Concrete offer customers the opportunity to design their own block to individual specification so long as the order requirement is at least 250 tonnes of blocks. This is to allow reasonable payback on the production set-up costs.

We have set certain limiting guidelines to the sizes that can be specified. These are as follows...

The footprint as made of any new block design can be as small as a 100mm slip with a minimum thickness of around 38mm (this being the minimum possible for successful filling of the mould).

Also the footprint as made of any new block design can be as large as 1160 x 915mm this being the maximum size of the block-making mould.

The two preferred heights of block when made are 215mm and 440mm high – the nominal absolute minimum and maximum heights being 200mm and 450mm respectively, with the sides of the product ideally being vertical when made.
DOWNLOAD PDF DATA SHEET
FOR THIS PRODUCT
 
home  |  works  |  product catalogues  |  contact us

Stowell Concrete Limited, Arnolds Way, Yatton Bristol BS49 4QN
Tel: 01934 834000   Fax: 01934 835474   Email: sales@stowellconcrete.co.uk

site design: carn gerrish creative